Request
a quotation
Type 2 surge protective device
ARGOS surge protective devices of AG2 range are adapted for overvoltage protections of type 2.
Modular type 2 surge protective device – Imax 40kA – 3P+
40 kA pre-assembled plug in protections – TT and TNS neutral earthing systems
385 V networks- Applications levels I and II
Tests standards : EN 61643-11
Certification : TÜV Rheinland
Description
These surge protective devices with a type 2 connection or “C2” (varistors + spark gaps) are recommended for TT and TNS neutral earthing systems. Plug in and pre-assembled in 4 poles with a single terminal for remote monitoring, their installation is straight forward and maintenance of the networks can be done in total safety (isolation tests, …).
Standard applications : Main boards of main and secondary buildings (sites with a low risk level). Distribution boards : second protection level (sites with lightning rods or high level of risk). Protection of sensitive equipments (autocom, alarm or fire centers, private flats, …).
Mounting on symmetrical DIN rail foot (EN 50022).
| Technical features | |
| Reference | ARGAG220403858 |
| Class (according to IEC 61643-11 standard) | Type 2 |
| Maximum continuous operating voltage AC (L-N) Uc | 385V |
| Maximum operating voltage AC (N-PE) Uc | 255V |
| Nominal discharge current (8/20us) In | 20kA |
| Maximal discharge current (8/20us) Imax | 40kA |
| Level of protection Up | <1.8kV / 1,5kV |
| Maximal backup fuse | 125A gl |
| Response time (L-N/N-PE) tA | <25ns / <100ns |
| Operating temperature | – 40°C ~ + 80°C |
| Status indicator : in operation / fault | Green / red |
| Connection section (min-max) | 4-35mm² |
| Mounting on | Rail DIN 35mm |
| Cabinet | Thermoplastic UL94-V10 |
| Index of protection | IP20 |
Rules of installation and electrical safety : NF C 15-100, IEC 60364 or equivalent national electrical standard.
- 3+1 (type “C2”) : protection L-N et N-PE (connection of type 2). L: phase. N: neutral. PE: earth.
- MOV: varistors. GDT: encapsulated spark gaps.
- EN 61643-11 : tests with protection device against short circuit currents (IEC 61643-1/1998 : without).
- Maximum calibre of fuses upstream the surge protective devices (circuit breakers : 160A gl).
Modular type 2 surge protective device– Imax 40kA – 1P+N
40 kA pre assembled plug in protections– TT and TNS neutral earthing systems
230 V networks- Applications levels I and II
Tests standards : EN 61643-11
These surge protective devices with a type 2 connection or “C2” (varistors + spark gaps) are recommended for TT and TNS neutral earthing systems. Plug in and pre-assembled in 2 poles with a single terminal for remote monitoring, their installation is straight forward and maintenance of the networks can be done in total safety (isolation tests, …).
Standard applications : Distribution boards : second protection level (sites with lightning rods or high level of risk). Protection of sensitive equipments (autocom, alarm or fire centers, private flats, …).
Mounting on symmetrical DIN rail foot (EN 50022).
| Technical features | |
| Reference | ARGAG220402756 |
| Class (according to IEC 61643-11 standard) | Type 2 |
| Maximum continuous operating voltage AC (L-N) Uc | 275V |
| Maximum operating voltage AC (N-PE) Uc | 255V |
| Nominal discharge current (8/20us) In | 20kA |
| Maximal discharge current (8/20us) Imax | 40kA |
| Level of protection Up | <1,5kV |
| Maximal backup fuse | 125A gl |
| Response time (L-N/N-PE) tA | <25ns / <100ns |
| Operating temperature | – 40°C ~ + 80°C |
| Status indicator : in operation / fault | Green / red |
| Connection section (min-max) | 4-35mm² |
| Mounting on | Rail DIN 35mm |
| Cabinet | Thermoplastic UL94-V10 |
| Index of protection | IP20 |
Rules of installation and electrical safety : NF C 15-100, IEC 60364 or equivalent national electrical standard.
- 1+1 (type “C2”) : protection L-N et N-PE (connection of type 2). L : phase. N : neutral. PE : earth.
- MOV : varistors. GDT: encapsulated spark gaps.
- EN 61643-11 : tests with protection device against short circuit currents (IEC 61643-1/1998 : without).
- Maximum calibre of fuses upstream the surge protective devices (circuit breakers : 160A gl).
Main rules of installation
Type 2 surge protective device
ARGOS surge protective devices of AG2 range are adapted for overvoltage protections of type 2.
Modular type 2 surge protective device – Imax 40kA – 3P+
40 kA pre-assembled plug in protections – TT and TNS neutral earthing systems
385 V networks- Applications levels I and II
Tests standards : EN 61643-11
Certification : TÜV Rheinland
Description
These surge protective devices with a type 2 connection or “C2” (varistors + spark gaps) are recommended for TT and TNS neutral earthing systems. Plug in and pre-assembled in 4 poles with a single terminal for remote monitoring, their installation is straight forward and maintenance of the networks can be done in total safety (isolation tests, …).
Standard applications : Main boards of main and secondary buildings (sites with a low risk level). Distribution boards : second protection level (sites with lightning rods or high level of risk). Protection of sensitive equipments (autocom, alarm or fire centers, private flats, …).
Mounting on symmetrical DIN rail foot (EN 50022).
| Technical features | |
| Reference | ARGAG220403858 |
| Class (according to IEC 61643-11 standard) | Type 2 |
| Maximum continuous operating voltage AC (L-N) Uc | 385V |
| Maximum operating voltage AC (N-PE) Uc | 255V |
| Nominal discharge current (8/20us) In | 20kA |
| Maximal discharge current (8/20us) Imax | 40kA |
| Level of protection Up | <1.8kV / 1,5kV |
| Maximal backup fuse | 125A gl |
| Response time (L-N/N-PE) tA | <25ns / <100ns |
| Operating temperature | – 40°C ~ + 80°C |
| Status indicator : in operation / fault | Green / red |
| Connection section (min-max) | 4-35mm² |
| Mounting on | Rail DIN 35mm |
| Cabinet | Thermoplastic UL94-V10 |
| Index of protection | IP20 |
Rules of installation and electrical safety : NF C 15-100, IEC 60364 or equivalent national electrical standard.
- 3+1 (type “C2”) : protection L-N et N-PE (connection of type 2). L: phase. N: neutral. PE: earth.
- MOV: varistors. GDT: encapsulated spark gaps.
- EN 61643-11 : tests with protection device against short circuit currents (IEC 61643-1/1998 : without).
- Maximum calibre of fuses upstream the surge protective devices (circuit breakers : 160A gl).
Modular type 2 surge protective device– Imax 40kA – 1P+N
40 kA pre assembled plug in protections– TT and TNS neutral earthing systems
230 V networks- Applications levels I and II
Tests standards : EN 61643-11
These surge protective devices with a type 2 connection or “C2” (varistors + spark gaps) are recommended for TT and TNS neutral earthing systems. Plug in and pre-assembled in 2 poles with a single terminal for remote monitoring, their installation is straight forward and maintenance of the networks can be done in total safety (isolation tests, …).
Standard applications : Distribution boards : second protection level (sites with lightning rods or high level of risk). Protection of sensitive equipments (autocom, alarm or fire centers, private flats, …).
Mounting on symmetrical DIN rail foot (EN 50022).
| Technical features | |
| Reference | ARGAG220402756 |
| Class (according to IEC 61643-11 standard) | Type 2 |
| Maximum continuous operating voltage AC (L-N) Uc | 275V |
| Maximum operating voltage AC (N-PE) Uc | 255V |
| Nominal discharge current (8/20us) In | 20kA |
| Maximal discharge current (8/20us) Imax | 40kA |
| Level of protection Up | <1,5kV |
| Maximal backup fuse | 125A gl |
| Response time (L-N/N-PE) tA | <25ns / <100ns |
| Operating temperature | – 40°C ~ + 80°C |
| Status indicator : in operation / fault | Green / red |
| Connection section (min-max) | 4-35mm² |
| Mounting on | Rail DIN 35mm |
| Cabinet | Thermoplastic UL94-V10 |
| Index of protection | IP20 |
Rules of installation and electrical safety : NF C 15-100, IEC 60364 or equivalent national electrical standard.
- 1+1 (type “C2”) : protection L-N et N-PE (connection of type 2). L : phase. N : neutral. PE : earth.
- MOV : varistors. GDT: encapsulated spark gaps.
- EN 61643-11 : tests with protection device against short circuit currents (IEC 61643-1/1998 : without).
- Maximum calibre of fuses upstream the surge protective devices (circuit breakers : 160A gl).
Main rules of installation